Diisononyl Phthalate (DINP)
Diisononyl Phthalate (DINP) (CAS No. 28553-12-0) is supplied as clear, transparent liquid. Key specifications include Ester content ≥99.5% (GC home method), Density at 20 °C 0.969–0.979 g/cm³ (ASTM D1045). Identified uses include general-purpose plasticizer for flexible PVC films, sheets and coated fabrics, Wire and cable insulation compounds, PVC plastisols, flooring and synthetic leather.
Quick Facts
- Ester content: ≥99.5% (GC home method)
- Density at 20 °C: 0.969–0.979 g/cm³ (ASTM D1045)
- Executive Standard: Plastay Inafleks DINP Technical Data Sheet, Rev. 08 dated 13 June 2025; ASTM methods as listed for each parameter.
- Not regulated as dangerous goods.
- ISO tanks, flexitanks/flexibags, IBCs, road tank containers and bulk (Plastay TDS; https://www.plastay.com/documents/products/inafleks-dinp/tds-en.pdf). Other packaging is subject to enquiry.
- COA provided with each batch; MSDS & SPEC available
Specifications
| Item | Specification |
|---|---|
| Appearance | Transparent liquid |
| Ester content | ≥99.5% (GC home method) |
| Density at 20 °C | 0.969–0.979 g/cm³ (ASTM D1045) |
| Refractive index at 20 °C | 1.4810–1.4890 (ASTM D1045) |
| Viscosity at 20 °C | 70–100 cP (ASTM D1045) |
| Flash point, open cup | ≥205 °C (ASTM D92) |
| Water content | ≤0.05% (ASTM D1364-02) |
| Acidity | ≤0.07 mg KOH/g (ASTM D1045) |
| Color | ≤30 Pt-Co (ASTM D1209) |
| Water solubility at 20 °C | ≤0.00004 g/L (manufacturer typical value) |
Specification basis: Public manufacturer specification; final supply subject to Richest COA. The selected specification, safety classification and transport decision all use Plastay's current public Inafleks DINP TDS/SDS for CAS 28553-12-0.
Main Applications
- General-purpose plasticizer for flexible PVC films, sheets and coated fabrics
- Wire and cable insulation compounds
- PVC plastisols, flooring and synthetic leather
- Coatings and rubber formulations
Packaging & Shipping
Packaging: ISO tanks, flexitanks/flexibags, IBCs, road tank containers and bulk (Plastay TDS; https://www.plastay.com/documents/products/inafleks-dinp/tds-en.pdf). Other packaging is subject to enquiry.. Not regulated as dangerous goods. Store in the original container in a cool, dry, well-ventilated place, protected from moisture and below 40 °C. Plastay states a two-year storage period when moisture is excluded. Ground containers, keep away from ignition sources, strong oxidants, acids and alkalis, and do not use PVC storage containers. COA is provided with each batch; MSDS and SPEC are available upon request.